How to Make Homemade Bubbles

Bubbles are one of the most popular children’s toys, but making them is time-consuming. In this tutorial, you will learn how to make bubbles and bubble wands that only take about ten minutes from start to finish!

Bubble-blowing solution from a store is inexpensive and widely accessible. However, like with many other items, it’s not always feasible to determine precisely what’s in each container. In addition, you may want to have greater control over what your children are exposed to since they will get bubble solution on their hands, inhale the fumes, and perhaps bust bubbles in their faces.

There are several recipes for making homemade bubbles. However, as most recipes propose using a commercial dish detergent – the more concentrated, the better — as the primary component, the resultant bubble solutions may be no safer than commercial goods. Likewise, making your bubble solution from a product that includes a variety of complex features, such as to scents, colors, preservatives, foaming agents, thickening agents, and even hazardous antimicrobials, is hardly an improvement, apart from convenience (assuming you have such a dish detergent on hand).

Isn’t detergent merely a fancy way of saying “soap”?

No! While soap and detergent both assist in making water “wetter” and transform it into a better cleaning agent, they are incredibly different, mainly when dealing with heavy items. Soap is manufactured from animal fats and vegetable oils and is a natural product. Detergents are made of synthetic materials. They are made up of a variety of synthetic chemicals. Skin irritation, respiratory disorders, developmental and reproductive concerns, cancer, and environmental disturbance have all been associated with some substances. Thank you, but we’ll stick to the soap. The Environmental Working Group has put up a helpful guide to help you choose a safe dishwashing liquid (and learn more about what chemicals might be lurking in dish detergents).

How to Make Bubbles at Home

On the internet, there are several recipes for making homemade bubbles. Don’t be deceived, however. Even though “dish soap” is included in the ingredients list, it refers to liquid dish detergent. Don’t bother replacing dish detergent (or “dish liquid”) with actual dish soap in a recipe. If you’re using soap, you’ll need to use more dish soap and less water to make a bubble-blowing soap solution.

Dish soap generates bubbles, but they are minor and fleeting compared to the wealthy, durable, chemically enhanced bubbles created by dish detergents like Dawn or Joy. Bubbles the size of a VW Bug or bubbles that drop glittering on the lawn and last 15 minutes before bursting will never be produced by a bubble solution made from natural soap. So if you’d rather have a bunch of happy, healthy tiny bubbles, keep reading to discover how to produce homemade bubbles!

Adding glycerin and sugar to a soap-based bubble solution increases the quality somewhat, and with soap, every little bit helps. Glycerin is a natural substance that may be found in most pharmacies. It’s used in foods, cosmetics, lubricants, and other consumer items and is usually relatively safe. Although we aren’t great lovers of refined sugar, a small amount of granulated sugar (organic, preferably) in the soap bubble solution is good. After this post, you’ll find a simple method for making homemade bubbles.

How to Make Bubbles at Home: Some Tips

  • Each type of liquid dish soap is unique in terms of concentration and bubble quality. As a result, you may need to do some experimenting to discover one that works best for you. If you’re learning how to produce homemade bubbles, start with a tiny batch and test it out before moving on to a more extensive set. Any packs that don’t work may be saved and used to refill hand-washing soap dispensers.
  • Allowing a soap bubble solution to rest for a few hours or overnight will help it operate better.
  • If soap bubbles explode in your face and the tiny drops get into your eyes, it hurts.
  • When natural soap bubbles break, they create pretty soapy streaks, so keep them for outdoor play or bathtub pleasure or whenever you’re preparing to clean the floor (and skip the soap in the mop bucket).
  • The liquid dish soap in the recipe may be replaced with grated, unscented bar soap or soap flakes mixed in hot water. To figure out how much to use, you’ll have to experiment. Also, be ready for some surprises. For example, your bubble solution may harden overnight into a gel, depending on what oils or fats were used to manufacture the soap — and how concentrated a solution you generate. That’s great for cleaning, but not so much for creating bubbles!

How to Make Your Bubble Wands

You’ll need a magic wand to convert your bubble solution into bubbles after you’ve mastered it. You may either use the rods that come with commercial bubble solution bottles or create your own. To build a bubble wand, follow these steps:

  • First, cut a 12-inch long strand of bare wire.
  • Next, make a three-quarter-inch to one-inch loop (like a lollypop shape) at one end.
  • Next, twist the wire’s ends tightly around the main piece so that no sharp ends protrude.
  • Next, make a smaller loop at the other end to assist you in keeping hold of it when it turns soapy-slippery.
  • If your wire is too fragile to keep firm while dipping and blowing, build a more robust cable by twisting two or three 14-inch sections together first. After that, form it into the correct shape.
  • Compared to bare wire or a plastic loop, the multi-stranded twisted wire has more nooks and crannies in the business end to store more bubble solutions.
  • Twist approximately 10 inches of two or three 14-inch strands of wire together to make bubble clusters. Next, create a large loop using the untwisted segment. Then, to overlap the circles, move them away from a little.

Pipe cleaners are often promoted as a simple and inexpensive wand material. The cheap, brilliantly colored “chenille stems” found at dollar shops and chain craft stores, on the other hand, are frail and laden with toxic chemicals and other pollutants that you don’t want little children handling. Furthermore, they seem to interact with the soap solution to make it less bubbly in our experience. Natural cotton pipe cleaners could be a better option. They’re also perfect for a variety of other kid-friendly projects.

How to Blow Soap Bubbles

Here are some suggestions on enjoying your handmade bubbles now that you know how to create them!

  • Dip the bubble wand’s business end into the bubble solution.
  • Place the loop in front of your face and hold it there. Blow softly but hard at the soapy film that spans the loop.
  • When a bubble forms on the loop, it has the potential to separate itself. A single plunge may also typically launch a few tiny drops.
  • Blow a bit less forcefully for more giant bubbles to gently inflate a bubble. Then, with a slight sideways movement or a flick of the wand, seal and release the bubble.

It takes some trial and error to find out how hard to blow to fill but not bust a bubble, as well as how to launch a vast drop. However, that’s all part of the fun!

Making Giant Bubbles: A Note

With a bit of skill, you can blow a lot of 4-inch and even a few 6-inch bubbles using soap bubble solution, but that’s about the maximum size limit. Aficionados of giant bubbles use the most concentrated, bubbliest dish detergent (not soap) they can find. The bubbles are then treated with a polymer to make them even more robust. Guar gum, an all-natural substance, is one polymer that works well with detergents. But don’t get carried away. When blended with actual soap, guar gum seems to have the exact opposite impact on bubbles. The solution has indeed thickened. It is, however, worthless for even the tiny bubble. So, guar gum is your buddy if you want to produce thicker, all-natural hand soap, but leave it out of your homemade bubble solution when using dish soap.

Frequently Asked Questions

How do you make a homemade bubble mixture?

A: To make a homemade bubble mixture, you’ll need a tablespoon of dish soap and 2 cups of water. You can also use milk or juice as alternatives to the water. Next, mix in two tablespoons of cornstarch and stir until it’s dissolved into the liquid. Then add three drops of food coloring and stir. Finally, pour this mixture onto a tray with newspapers on top for easy cleanup!

How do you make bubbles without glycerin?

A: You can use a mixture of aloe vera gel and water to make bubbles. This will take 10-20 minutes, as it is difficult for the medicine to mix.

How do you make giant bubbles at home?

A: You can use a mixture of detergent and water to accomplish this task.

Related Tags

  • how to make bubbles without glycerin
  • homemade bubble wands
  • homemade bubble solution without sugar
  • homemade bubbles with glycerin
  • how to make bubble solution with shampoo

FDA Compliance

The information on this website has not been evaluated by the Food & Drug Administration or any other medical body. We do not aim to diagnose, treat, cure or prevent any illness or disease. Information is shared for educational purposes only. You must consult your doctor before acting on any content on this website, especially if you are pregnant, nursing, taking medication, or have a medical condition.


1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)